The Crazy 88 3D EPP ARF biplane was designed as an advanced 3D plane that could be flown anywhere!  The Crazy 88's extremely fast roll rate and ridiculous maneuverability make it a potent tool in the hands of an experienced pilot however, it can be flown at low rates by an intermediate pilot.  Its "fly anywhere" design philosophy resulted in an airframe with very few breakable parts or non EPP structure, which means you can bash off the ground, walls or other hard objects all day long and do little to no damage.  Each Crazy 88  airframe comes fully airbrushed with a tribal racing scheme, logos, lettering and tab to notch construction.  All movements pre beveled and fully hinged to make build time even less.  This is one of the most simple bipe to build that you will ever put together. 
Videos:

ARF Specs:
23" wing span
25" length
AUW (full weight with 2s500mah 6.1oz) without battery 4.85oz
CNC cut 9mm EPP foam airframe
Unique hand aribrush painted custome scheme.
Tabbed construction
Pre-cut servo locations
Pre-beveled and hinged control surfaces finished!
10mm Motor stick mount with included face plate
Carbon fiber push rods
Pre-bent control wires
Dubro micro wires
Pre-bent axel wires
Control Horns
Gang Horns
Eyelet control supports
Tail Skid
Velcro for receiver and battery

Requires:
4ch radio and micro reciever
24g 1500kv outrunner with 10mm style motor mount
8-10 amp esc
(1) 9gram aileron servo
(2) 5 gram rudder & elevator servos
2-3s 330-550mah lipo battery
8x4.3/9x4.7 prop
Welder Adhesive or Hot Glue